Can you find all 8 hazards in this office?
Tap or click anything you think is dangerous. Every one of them is something we find on real jobs.
-
Extension leads plugged into each other
Plugging one extension lead into another (daisy-chaining) makes it easy to draw more current than the first lead can take. It overheats, and that is how many electrical fires start. Use one lead, or have more sockets fitted.
-
An overloaded plug adapter
Three plugs crammed into one socket with a block adapter can overload it, and the weight drags the plug part way out of the socket, which causes heat and sparking. Use a fused extension lead instead, and never plug adapters into adapters.
-
A fan heater plugged into an extension lead
Heaters draw a lot of current, close to the 13 amp limit of most extension leads. Running one from a lead makes the lead overheat, and it is one of the most common hazards we find. Heaters should always go straight into a wall socket.
-
A cable across the walkway
Someone will trip over it, and every trip yanks the cable, damaging the plug and the wires inside it. Run cables along walls, or under a proper cable cover.
-
A drink spilt next to an extension lead
Water and electricity do not mix. A spill that reaches the sockets can cause a short circuit or an electric shock. Keep drinks away from leads, and unplug at the wall before mopping up.
-
A coat and papers on a heater
Covering a heater traps the heat. The heater can overheat, and the coat and papers can catch fire. Keep heaters clear on all sides.
-
A cracked phone charger
The case on this charger is cracked, so the live parts inside can be touched. Cheap chargers often have very little insulation inside. A damaged charger should be thrown away, not taped up.
-
An appliance that failed its PAT test
This kettle has a red FAIL label, so it was found unsafe at its last test, yet someone is still using it. A failed item must be taken out of use until it is repaired and passes a retest, or thrown away.
You found them all!
Every one of these is something we find on real jobs. A PAT test checks every appliance, lead and plug, so problems like these are caught before they cause a fire or an electric shock.
Why these hazards matter
Most electrical fires and shocks at work start with something ordinary: a lead that is doing too much, a damaged plug or charger, or an appliance that should have been taken out of use. They are easy to miss day to day, which is why regular PAT testing matters. Every appliance is visually inspected and electrically tested, every plug top is taken off and every fuse checked.
Not sure how often your equipment should be tested? Take our one-minute check, or see our prices.
